Tùr Servo le Inneal Deil CNC Earbaill Sreath T
Bhidio Bathar
Rèiteachadh Bathar
Feartan an inneil
Àrd-chruaidheachd, gearradh trom, agus seasmhachd àrd: Bidh e a’ gabhail ri leabaidh tilgte incLined amalaichte, structar leabaidh incLined 30°, agus dealbhadh rib tiugh gus saobhadh agus deformachadh teirmeach a lughdachadh.
Àrd-chruinneas agus freagairt àrd dhinimigeach: Bithear a’ cleachdadh giùlan ball àrd-chruinneas aig an aghaidh agus air a’ chùl gus cruas àrd an fhearsain agus cruinneas rothlaidh an fhearsain air leth àrd a choileanadh.
Aonad servo spindle, mionaideachd àrd agus cumail suas goireasach.
Èifeachdas àrd: Is e 4500rpm / min an astar as àirde den spindle, agus faodaidh an gluasad luath ruighinn 30m / min.
Sònrachaidhean Teicnigeach
| Pròiseact | CNC-460T(460) | CNC-520T(460) | CNC-520T(520) | CNC-650T(700) | |
| Frèam Leabaidh | Tha an leabaidh agus a’ bhunait air an dèanamh de iarann tilgte àrd-inbhe, agus tha an leabaidh claon 40°. | Tha an leabaidh agus a’ bhunait air an dèanamh de iarann tilgte àrd-inbhe, agus tha an leabaidh air a claonadh aig 30°. | |||
| Giullachd | Trast-thomhas as motha den luing thairis air an leabaidh | 580mm | 580mm | 600mm | 600mm |
| Trast-thomhas giollachd as motha de dhiosgaichean | 400mm | 400mm | 350mm | 400mm | |
| Trast-thomhas giollachd as motha a’ charbaid | 280mm | 280mm | 350mm | 400mm | |
| Fad giollachd as motha a’ bhàr | 460mm | 460mm | 520mm | 700mm | |
| Trast-thomhas as motha a’ bhàr | ф45mm | ф51mm | ф51mm | ф65mm | |
| Siubhal | Siubhal as motha air ais-X | 230mm | 240mm | 220mm | 220mm |
| Siubhal as motha air ais-Z | 500mm | 500mm | 550mm | 770mm | |
| Astar luath X/Z-axis | 30mm | 30m/mionaid | 24m/mionaid | 25m/mionaid | |
| Trast-thomhas/pàirc sgriubha X/Z | 32/10mm | 32/10mm | X:40/10mm | 40/10mm | |
| Leud treòrachaidh loidhneach X/Z | 35mm | 35mm | 45mm | 35mm | |
| Motair servo axis-X | β12 (Breic) | β12 (Breic) | β12 (Breic) | β12 (Breic) | |
| Motair servo Z-axis | β12 | β12 | β12 | β12 | |
| Motair servo turaid | 3N.m | 3N.m | 3N.m | 3N.m | |
| Cruinneas | Cruinneas suidheachaidh an ais X/Z | ±0.003mm | ±0.003mm | ±0.003mm | ±0.003mm |
| Ath-aithriseachd ais-X/Z | ±0.003mm | ±0.003mm | ±0.003mm | ±0.003mm | |
| Earball Gluasad | Sònrachaidhean muinchill earbaill | Mohs#5 | Mohs#5 | Mohs#5/80 | Mohs#5 |
| Siubhal muinchille earbaill | 40-460mm | 40-460mm | 50-600mm | 50-800mm | |
| Raon cuideam earbaill | 5-30Kg/cm² | 5-30Kg/cm² | 5-30Kg/cm² | 5-30Kg/cm² | |
| Modh gluasad earbaill | Hiodralach prògramaichte | Hiodralach prògramaichte | Hiodralach prògramaichte | Dìollaid air a stiùireadh, | |
| Spindle | Teip an t-snàthainn | A2-5 | A2-6 | A2-6 | A2-6 |
| Trast-thomhas toll an t-snàthainn | ф56mm | ф75mm | ф75mm | ф75mm | |
| Astar as àirde an t-snàthainn | 6000rpm | 4500rpm | 4500rpm | 4000rpm | |
| Cumhachd motair servo spindle | 7.5/11KW | 1KW | 11/15KW | 11/15KW | |
| Chuck / siolandair rothlach | 6"/6" | 8"/8" | 8"/8al | 8" | |
| Tùr | Sònrachaidhean an tùir | 80 Meadhan àrd/ | 80 Meadhan àrd/ | 100 Meadhan àrd/ | 100 Meadhan àrd/ |
| Ceann gearraidh mòr | 340 | 340 | 420 | 380 | |
| Sònrachaidhean neach-gleidhidh innealan | □25 × 25 | □25 × 25 | □25 × 25 | □25 × 25 | |
| Neach-gleidhidh inneal tolladh | ф40mm | ф40mm | ф40mm | ф40mm | |
| Eile | Comas iomlan | 15KW | 20KW | 20KW | 20KW |
| Cuideam lom inneal-inneil | Mu 4500Kg | Mu 4500K | Mu 5000Kg | Mu 5700Kg | |
| Meud an inneil (fad × leud × àirde) | 2600 × 1700 × 1900mm | 2600 × 1700 × 1900mm | 2800 × 2000 × 1900mm | 2800 × 1800 × 1800mm | |
| Pròiseact | CNC-860T(1000) | CNC-860T(2000) | CNC-860T(3000) | |
| Frèam Leabaidh | Tha an leabaidh agus a’ bhunait air an dèanamh de iarann tilgte àrd-inbhe, agus tha an leabaidh air a claonadh aig 40°. | |||
| Giullachd | Trast-thomhas as motha den luing thairis air an leabaidh | 780mm | 7800m | 780mm |
| Trast-thomhas giollachd as motha de dhiosgaichean | 600mm | 600mm | 600mm | |
| Trast-thomhas giollachd as motha a’ charbaid | 500mmmm | 500mm | 500mm | |
| Fad giollachd as motha a’ bhàr | 1000mm | 2000mm | 3000mm | |
| Trast-thomhas as motha a’ bhàr | ф75mm | ф75mm | ф75mm | |
| Siubhal | Siubhal as motha air ais-X | 350mm | 350mm | 350mm |
| Siubhal as motha air ais-Z | 1050mm | 2050mm | 3050mm | |
| Astar luath X/Z-axis | 18m/mion | 18m/mion | 15m/mionaid | |
| Trast-thomhas/pàirc sgriubha X/Z | X50/08mm | X:50/08mm | X:50/08mm | |
| Leud treòrachaidh loidhneach X/Z | 55mm | 55mm | 55mm | |
| Motair servo axis-X | P22 (Breic) | β22 (Breic) | β22 (Breic) | |
| Motair servo Z-axis | β22 | β22 | β30 | |
| Motair servo turaid | 3N.m | 3N.m | 3N.m | |
| Cruinneas | Cruinneas suidheachaidh an ais X/Z | ±0.003/300mm | ±0.003/300mm | ±0.003/300mm |
| Ath-aithriseachd ais-X/Z | ±0.003/300mm | ±0.003/300mm | ±0.003/300mm | |
| Earball Gluasad | Sònrachaidhean muinchill earbaill | Mohs#5 | Mohs#5 | Mohs#5 |
| Siubhal muinchille earbaill | ф150/200mm | ф150/200mm | ф150/200 | |
| Raon cuideam earbaill | 5-30Kg/cm² | 5-30Kg/cm² | 5-30Kg/cm | |
| Modh gluasad earbaill | Hiodralach prògramaichte | Hiodralach prògramaichte | Hiodralach prògramaichte | |
| Spindle | Teip an t-snàthainn | A2-8 | A2-8 | A2-8 |
| Trast-thomhas toll an t-snàthainn | ф88mm | ф8Bmm | ф88mm | |
| Astar as àirde an t-snàthainn | 2500rpm | 2500rpm | 2500rpm | |
| Cumhachd motair servo spindle | 15KW | 18.5KW | 22KW | |
| Chuck / siolandair rothlach | 10"/10" | 10"/10" | 10"/10" | |
| Tùr | Sònrachaidhean an tùir | 100 Meadhan àrd/ | 125 Meadhan àrd/ | 125 Meadhan àrd/ |
| Ceann gearraidh mòr | 440 | 440 | 440 | |
| Sònrachaidhean neach-gleidhidh innealan | □32 × 32 | □32 × 32 | □32 × 32 | |
| Neach-gleidhidh inneal tolladh | ф50mm | ф50mm | ф50mm | |
| Eile | Comas iomlan | 27KW | 31KW | 35KW |
| Cuideam lom inneal-inneil | Mu 7700Kg | Mu 9700Kg | Mu 18500Kg | |
| Meud an inneil (fad × leud × àirde) | 6000 × 2300 × 2550mm | 7000 × 2300 × 2550mm | 7500 × 2500 × 2550mm | |
| Pròiseact | CNC-960T(1000) | CNC-960T(2000) | CNC-960T(3000) | |
| Frèam Leabaidh | Tha an leabaidh agus a’ bhunait air an dèanamh de iarann tilgte àrd-inbhe, agus tha an leabaidh air a claonadh aig 40°. | |||
| Giullachd | Trast-thomhas as motha den luing thairis air an leabaidh | 880mm | 880mm | 880mm |
| Trast-thomhas giollachd as motha de dhiosgaichean | 600mm | 600mm | 600mm | |
| Trast-thomhas giollachd as motha a’ charbaid | 600mm | 600mm | 600mm | |
| Fad giollachd as motha a’ bhàr | 1000mm | 2000mm | 3000mm | |
| Trast-thomhas as motha a’ bhàr | ф91mm | φ91mm | φ91mm | |
| Siubhal | Siubhal as motha air ais-X | 350mm | 350mm | 350mm |
| Siubhal as motha air ais-Z | 1050mm | 2050mm | 3050mm | |
| Astar luath X/Z-axis | 18m/mion | 18m/mion | 15m/mionaid | |
| Trast-thomhas/pàirc sgriubha X/Z | X:50/08mm | X:50/08mm | X:50/08mm | |
| Leud treòrachaidh loidhneach X/Z | 55mm | 55mm | 55mm | |
| Motair servo axis-X | β22 (Breic) | β22 (Breic) | β22 (Breic) | |
| Motair servo Z-axis | β22 | β22 | β30 | |
| Motair servo turaid | 3N.m | 3N.m | 3Nm | |
| Cruinneas | Cruinneas suidheachaidh an ais X/Z | ±0.003/300mm | ±0.003/300mm | ±0.003/300mm |
| Ath-aithriseachd ais-X/Z | ±0.003/300mm | ±0.003/300mm | ±0.003/300mm | |
| Earball Gluasad | Sònrachaidhean muinchill earbaill | Mohs#5 | Mohs#5 | Mohs#5 |
| Siubhal muinchille earbaill | ф150/200mm | ф150/200mm | ф150/200mm | |
| Raon cuideam earbaill | 5-30Kg/cm² | 5-30Kg/cm² | 5-30Kg/cm² | |
| Modh gluasad earbaill | Hiodralach prògramaichte | Hiodralach prògramaichte | Hiodralach prògramaichte | |
| Spindle | Teip an t-snàthainn | A2-11 | A2-11 | A2-11 |
| Trast-thomhas toll an t-snàthainn | ф105mm | ф105mm | ф105mm | |
| Astar as àirde an t-snàthainn | 2200rpm | 2200rpm | 2200rpm | |
| Cumhachd motair servo spindle | 15KW | 22KW | 22KW | |
| Chuck / siolandair rothlach | 12"/12" | 12"/12" | 12"/12" | |
| Tùr | Sònrachaidhean an tùir | 125 Meadhan àrd/ | 125 Meadhan àrd/ | 125 Meadhan àrd/ |
| Ceann gearraidh mòr | 440 | 440 | 440 | |
| Sònrachaidhean neach-gleidhidh innealan | □32 × 32 | □32 × 32 | □32 × 32 | |
| Neach-gleidhidh inneal tolladh | ф50mm | ф50mm | ф50mm | |
| Eile | Comas iomlan | 27KW | 35KW | 35KW |
| Cuideam lom inneal-inneil | Mu 8200Kg | Mu 10200Kg | Mu 12700Kg | |
| Meud an inneil (fad × leud × àirde) | 6000 × 2300 × 2550mm | 7000 × 2300 × 2550mm | 8500 × 2300 × 2550mm | |
Feartan rèiteachaidh
Spindle
Cuir taic ri gearradh àrd-chruinneas agus trom-dhleastanas gus cinneasachd a mheudachadh.
Tùr
A’ leasachadh earbsachd clàr-amais agus a’ dèanamh cinnteach cruas àrd.
Siostam
FANUC F Oi-TF P àbhaisteachlus CNC Siostam, coileanadh giollachd àrd ìre obrachaidh àrd, furasta a chleachdadh.
Àrd-chruaidheachd
Tilgeadh trom-dhleastanaisIBonn agus co-phàirtean ron, glacadh clisgeadh làidir agus seasmhachd àrd.
Sgriub Ball
Tha ro-theannachadh sgriubha, cùl-taic agus sìneadh teòthachd air an cuir às ro-làimh.
Stiùireadh Lìnearach Rolair
Gearradh bogha, gearradh bevel, agus inneach uachdar aonfhoirmeil. Cuairteachadh àrd-astar uile-choitcheann.
Àrd-chruaidheachd, gearradh trom, agus seasmhachd àrd: Bidh e a’ gabhail ri leabaidh tilgte incLined amalaichte, structar leabaidh incLined 30°, agus dealbhadh rib tiugh gus saobhadh agus deformachadh teirmeach a lughdachadh.
Àrd-chruinneas agus freagairt àrd dhinimigeach: Bithear a’ cleachdadh giùlan ball àrd-chruinneas aig an aghaidh agus air a’ chùl gus cruas àrd an fhearsain agus cruinneas rothlaidh an fhearsain air leth àrd a choileanadh.
Aonad servo spindle, mionaideachd àrd agus cumail suas goireasach.
Èifeachdas àrd: Is e 4500rpm / min an astar as àirde den spindle, agus faodaidh an gluasad luath ruighinn 30m / min.
| Pròiseact | CNC-460T(460) | CNC-520T(460) | CNC-520T(520) | CNC-650T(700) | |
| Frèam Leabaidh | Tha an leabaidh agus a’ bhunait air an dèanamh de iarann tilgte àrd-inbhe, agus tha an leabaidh claon 40°. | Tha an leabaidh agus a’ bhunait air an dèanamh de iarann tilgte àrd-inbhe, agus tha an leabaidh air a claonadh aig 30°. | |||
| Giullachd | Trast-thomhas as motha den luing thairis air an leabaidh | 580mm | 580mm | 600mm | 600mm |
| Trast-thomhas giollachd as motha de dhiosgaichean | 400mm | 400mm | 350mm | 400mm | |
| Trast-thomhas giollachd as motha a’ charbaid | 280mm | 280mm | 350mm | 400mm | |
| Fad giollachd as motha a’ bhàr | 460mm | 460mm | 520mm | 700mm | |
| Trast-thomhas as motha a’ bhàr | ф45mm | ф51mm | ф51mm | ф65mm | |
| Siubhal | Siubhal as motha air ais-X | 230mm | 240mm | 220mm | 220mm |
| Siubhal as motha air ais-Z | 500mm | 500mm | 550mm | 770mm | |
| Astar luath X/Z-axis | 30mm | 30m/mionaid | 24m/mionaid | 25m/mionaid | |
| Trast-thomhas/pàirc sgriubha X/Z | 32/10mm | 32/10mm | X:40/10mm | 40/10mm | |
| Leud treòrachaidh loidhneach X/Z | 35mm | 35mm | 45mm | 35mm | |
| Motair servo axis-X | β12 (Breic) | β12 (Breic) | β12 (Breic) | β12 (Breic) | |
| Motair servo Z-axis | β12 | β12 | β12 | β12 | |
| Motair servo turaid | 3N.m | 3N.m | 3N.m | 3N.m | |
| Cruinneas | Cruinneas suidheachaidh an ais X/Z | ±0.003mm | ±0.003mm | ±0.003mm | ±0.003mm |
| Ath-aithriseachd ais-X/Z | ±0.003mm | ±0.003mm | ±0.003mm | ±0.003mm | |
| Earball Gluasad | Sònrachaidhean muinchill earbaill | Mohs#5 | Mohs#5 | Mohs#5/80 | Mohs#5 |
| Siubhal muinchille earbaill | 40-460mm | 40-460mm | 50-600mm | 50-800mm | |
| Raon cuideam earbaill | 5-30Kg/cm² | 5-30Kg/cm² | 5-30Kg/cm² | 5-30Kg/cm² | |
| Modh gluasad earbaill | Hiodralach prògramaichte | Hiodralach prògramaichte | Hiodralach prògramaichte | Dìollaid air a stiùireadh, | |
| Spindle | Teip an t-snàthainn | A2-5 | A2-6 | A2-6 | A2-6 |
| Trast-thomhas toll an t-snàthainn | ф56mm | ф75mm | ф75mm | ф75mm | |
| Astar as àirde an t-snàthainn | 6000rpm | 4500rpm | 4500rpm | 4000rpm | |
| Cumhachd motair servo spindle | 7.5/11KW | 1KW | 11/15KW | 11/15KW | |
| Chuck / siolandair rothlach | 6″/6″ | 8″/8″ | 8″/8″ | 8″ | |
| Tùr | Sònrachaidhean an tùir | 80 Meadhan àrd/ | 80 Meadhan àrd/ | 100 Meadhan àrd/ | 100 Meadhan àrd/ |
| Ceann gearraidh mòr | 340 | 340 | 420 | 380 | |
| Sònrachaidhean neach-gleidhidh innealan | □25 × 25 | □25 × 25 | □25 × 25 | □25 × 25 | |
| Neach-gleidhidh inneal tolladh | ф40mm | ф40mm | ф40mm | ф40mm | |
| Eile | Comas iomlan | 15KW | 20KW | 20KW | 20KW |
| Cuideam lom inneal-inneil | Mu 4500Kg | Mu 4500K | Mu 5000Kg | Mu 5700Kg | |
| Meud an inneil (fad × leud × àirde) | 2600 × 1700 × 1900mm | 2600 × 1700 × 1900mm | 2800 × 2000 × 1900mm | 2800 × 1800 × 1800mm | |
| Pròiseact | CNC-860T(1000) | CNC-860T(2000) | CNC-860T(3000) | |
| Frèam Leabaidh | Tha an leabaidh agus a’ bhunait air an dèanamh de iarann tilgte àrd-inbhe, agus tha an leabaidh air a claonadh aig 40°. | |||
| Giullachd | Trast-thomhas as motha den luing thairis air an leabaidh | 780mm | 7800m | 780mm |
| Trast-thomhas giollachd as motha de dhiosgaichean | 600mm | 600mm | 600mm | |
| Trast-thomhas giollachd as motha a’ charbaid | 500mmmm | 500mm | 500mm | |
| Fad giollachd as motha a’ bhàr | 1000mm | 2000mm | 3000mm | |
| Trast-thomhas as motha a’ bhàr | ф75mm | ф75mm | ф75mm | |
| Siubhal | Siubhal as motha air ais-X | 350mm | 350mm | 350mm |
| Siubhal as motha air ais-Z | 1050mm | 2050mm | 3050mm | |
| Astar luath X/Z-axis | 18m/mion | 18m/mion | 15m/mionaid | |
| Trast-thomhas/pàirc sgriubha X/Z | X50/08mm | X:50/08mm | X:50/08mm | |
| Leud treòrachaidh loidhneach X/Z | 55mm | 55mm | 55mm | |
| Motair servo axis-X | P22 (Breic) | β22 (Breic) | β22 (Breic) | |
| Motair servo Z-axis | β22 | β22 | β30 | |
| Motair servo turaid | 3N.m | 3N.m | 3N.m | |
| Cruinneas | Cruinneas suidheachaidh an ais X/Z | ±0.003/300mm | ±0.003/300mm | ±0.003/300mm |
| Ath-aithriseachd ais-X/Z | ±0.003/300mm | ±0.003/300mm | ±0.003/300mm | |
| Earball Gluasad | Sònrachaidhean muinchill earbaill | Mohs#5 | Mohs#5 | Mohs#5 |
| Siubhal muinchille earbaill | ф150/200mm | ф150/200mm | ф150/200 | |
| Raon cuideam earbaill | 5-30Kg/cm² | 5-30Kg/cm² | 5-30Kg/cm | |
| Modh gluasad earbaill | Hiodralach prògramaichte | Hiodralach prògramaichte | Hiodralach prògramaichte | |
| Spindle | Teip an t-snàthainn | A2-8 | A2-8 | A2-8 |
| Trast-thomhas toll an t-snàthainn | ф88mm | ф8Bmm | ф88mm | |
| Astar as àirde an t-snàthainn | 2500rpm | 2500rpm | 2500rpm | |
| Cumhachd motair servo spindle | 15KW | 18.5KW | 22KW | |
| Chuck / siolandair rothlach | 10″/10″ | 10″/10″ | 10″/10″ | |
| Tùr | Sònrachaidhean an tùir | 100 Meadhan àrd/ | 125 Meadhan àrd/ | 125 Meadhan àrd/ |
| Ceann gearraidh mòr | 440 | 440 | 440 | |
| Sònrachaidhean neach-gleidhidh innealan | □32 × 32 | □32 × 32 | □32 × 32 | |
| Neach-gleidhidh inneal tolladh | ф50mm | ф50mm | ф50mm | |
| Eile | Comas iomlan | 27KW | 31KW | 35KW |
| Cuideam lom inneal-inneil | Mu 7700Kg | Mu 9700Kg | Mu 18500Kg | |
| Meud an inneil (fad × leud × àirde) | 6000 × 2300 × 2550mm | 7000 × 2300 × 2550mm | 7500 × 2500 × 2550mm | |
| Pròiseact | CNC-960T(1000) | CNC-960T(2000) | CNC-960T(3000) | |
| Frèam Leabaidh | Tha an leabaidh agus a’ bhunait air an dèanamh de iarann tilgte àrd-inbhe, agus tha an leabaidh air a claonadh aig 40°. | |||
| Giullachd | Trast-thomhas as motha den luing thairis air an leabaidh | 880mm | 880mm | 880mm |
| Trast-thomhas giollachd as motha de dhiosgaichean | 600mm | 600mm | 600mm | |
| Trast-thomhas giollachd as motha a’ charbaid | 600mm | 600mm | 600mm | |
| Fad giollachd as motha a’ bhàr | 1000mm | 2000mm | 3000mm | |
| Trast-thomhas as motha a’ bhàr | ф91mm | φ91mm | φ91mm | |
| Siubhal | Siubhal as motha air ais-X | 350mm | 350mm | 350mm |
| Siubhal as motha air ais-Z | 1050mm | 2050mm | 3050mm | |
| Astar luath X/Z-axis | 18m/mion | 18m/mion | 15m/mionaid | |
| Trast-thomhas/pàirc sgriubha X/Z | X:50/08mm | X:50/08mm | X:50/08mm | |
| Leud treòrachaidh loidhneach X/Z | 55mm | 55mm | 55mm | |
| Motair servo axis-X | β22 (Breic) | β22 (Breic) | β22 (Breic) | |
| Motair servo Z-axis | β22 | β22 | β30 | |
| Motair servo turaid | 3N.m | 3N.m | 3Nm | |
| Cruinneas | Cruinneas suidheachaidh an ais X/Z | ±0.003/300mm | ±0.003/300mm | ±0.003/300mm |
| Ath-aithriseachd ais-X/Z | ±0.003/300mm | ±0.003/300mm | ±0.003/300mm | |
| Earball Gluasad | Sònrachaidhean muinchill earbaill | Mohs#5 | Mohs#5 | Mohs#5 |
| Siubhal muinchille earbaill | ф150/200mm | ф150/200mm | ф150/200mm | |
| Raon cuideam earbaill | 5-30Kg/cm² | 5-30Kg/cm² | 5-30Kg/cm² | |
| Modh gluasad earbaill | Hiodralach prògramaichte | Hiodralach prògramaichte | Hiodralach prògramaichte | |
| Spindle | Teip an t-snàthainn | A2-11 | A2-11 | A2-11 |
| Trast-thomhas toll an t-snàthainn | ф105mm | ф105mm | ф105mm | |
| Astar as àirde an t-snàthainn | 2200rpm | 2200rpm | 2200rpm | |
| Cumhachd motair servo spindle | 15KW | 22KW | 22KW | |
| Chuck / siolandair rothlach | 12″/12″ | 12″/12″ | 12″/12″ | |
| Tùr | Sònrachaidhean an tùir | 125 Meadhan àrd/ | 125 Meadhan àrd/ | 125 Meadhan àrd/ |
| Ceann gearraidh mòr | 440 | 440 | 440 | |
| Sònrachaidhean neach-gleidhidh innealan | □32 × 32 | □32 × 32 | □32 × 32 | |
| Neach-gleidhidh inneal tolladh | ф50mm | ф50mm | ф50mm | |
| Eile | Comas iomlan | 27KW | 35KW | 35KW |
| Cuideam lom inneal-inneil | Mu 8200Kg | Mu 10200Kg | Mu 12700Kg | |
| Meud an inneil (fad × leud × àirde) | 6000 × 2300 × 2550mm | 7000 × 2300 × 2550mm | 8500 × 2300 × 2550mm | |
Roinnean thoraidhean
-
Ionad Machining CNC Àrd-chruaidheachd Sreath VC le ...
-
Stiùireadh Lìneach Colbh Gluasadach Còmhnard Sreath HP...
-
Stiùireadh Lìneach Colbh Gluasadach Còmhnard Sreath HT...
-
Inneal-maschineadh CNC trom-dhleastanais ceithir-shligheach sreath VS ...
-
Ionad Machining CNC Sreath V le Àrd-chruaidheachd
-
Ionad Machining CNC Colbh Dùbailte Sreath X
-
Ionad Machining CNC 5-Axis Còmhnard TKG1600
-
Inneal-tionndaidh is muilneachaidh CNC Ingearach Co-dhèanta ...
-
Ionad Machining CNC Àrd-astar Sreath GM
-
Sreath GT Muilleireachd CNC Àrd-astar
-
Deil CNC dà-shreath SK32
-
Ionad Machining Ingearach CNC RFTV510 Airson Cuibhle...